Underground light，In-ground 3D Rugged and reliable with a weight capacity of 1 tonne

This 24V in-ground 3D linear light is designed for shaped floor and landscape details where mechanical load is a key requirement. Available configurations include 6W/m or 10W/m and white or dynamic color options.

Structural and drainage design

A load rating applies only when the complete channel, substrate and installation method meet the tested configuration. Provide a stable base, drainage path and expansion allowance. Do not allow the light body or cable entry to sit in trapped water.

Project checklist

• Confirm whether traffic is pedestrian or vehicle-related.
• Verify the exact tested load and support spacing.
• Specify CCT, CRI or RGB/RGBIC control.
• Plan 24V drivers and accessible junction boxes.
• Use compatible sealed leads and end terminations.
• Mock up curves within the stated bend radius.

Review our in-ground installation guide and outdoor lighting applications. Project-specific lengths can be discussed through our custom service.

FAQ

Does one-tonne capacity mean any vehicle can drive over it?

No. Load distribution, support and the tested assembly must be reviewed by the project engineer.

Can it be installed without drainage?

No. Good drainage is essential even when the light body is protected.

Compare more SMD LED strip options, review our guide to choosing the right LED strip, and explore residential lighting applications.