This is 15 * 15mm top view RGB LED neon flex strip that can be shaped, bent to logos or signs.
DIY mountable and can be cut to the length you want.
Cutting marks are clearly visible, minimum cutting unit: 31mm each, typical length is 5m
(Length per roll can be customized).
Uniform brightness, no light spot, IP67 silicon extrusion waterproof.
Supply voltage is DC12V, choose the correct connection lead according to the color
Connection diagram provided.
Easy to use, safe to touch and operate.
High brightness, impact resistance, anti-yellowing, good transparency
High efficiency SMD RGB LED chip, fire resistant, UV resistant, corrosion and deformation resistant

Q1:  Can ZBL LED light strips be cut and soldered?

Yes. You can easily cut and solder ZBL LED ribbon lights. Make sure to cut along the copper connections so as to not damage any essential component of the strip. Remove the silicone covering to solder two tapes together. You can easily connect light strips using LED light strip connectors. 

Q2:  How do I install LED tape light?

Installing flexible LED ribbon lights is very easy. All you have to do is take off the protective tape from the adhesives at the back of each light strip and stick the strip in place. Rigid LED lights can be mounted through the mounting clips provided. You can also use Led Aluminium profiles to safely mount your LED light strips.

Q3:  How are ZBL LED light strips better than the rest?

ZBL LED light strips stand out from the rest because they perform better and last longer. We house a wide variety of LED ribbon lights. In addition, we offer full LED light strip customization. We also provide LED controllers, power supply, connectors, profiles, and more. This makes us a one-window solution to all your lighting needs.

Q4:  Does ZBL manufacture its own LED strip lights or are you a reseller?

ZBL manufacturer’s our own light LED strips. We have a meticulous LED light strip manufacturing process that helps us control each aspect of the light tape. This means we can design bespoke LED tape lights that cater to your exact lighting needs. We also do bulk LED light strip orders so you can light your entire project without any hassle. 

Q5: What kind of quality control tests do you use on your LED tape lights?

At ZBL, we put quality above all else. That is the reason why we have dedicated quality tests at the end of each stage in the LED tape light manufacturing process. These tests vary from general inspection to performance gauges. Here is a list of quality control tests we perform:

• LEDs Testing
• PCB Solder Paste Thickness Testing
• Power-on Testing (after SMT welding)
• High & Low-Temperature Testing
• Salty Water Testing
• Humidity Testing
• Tape Stickiness Detection
• Aging Test
• Integrating Sphere Testing