6×6mm Silicone Waterproof LED Light Strip | Single/Dual/RGB Compatible

This 6x6mm silicone housing converts a compatible narrow LED strip into a compact neon-style light line. It can be configured for single color, tunable white, RGB, RGBW or RGBCCT, depending on the internal strip and controller.

The sleeve is only part of the system

Final light output, voltage, CRI, color control and power come from the internal LED strip. The achieved IP rating depends on extrusion, end caps, cable entry and sealing workmanship—not the sleeve alone.

Design checklist

• Confirm internal PCB width and component height.
• Match bending direction to the detail.
• Check diffuser transmission and dot visibility.
• Select compatible clips or aluminum channel.
• Specify factory-finished leads for protected installations.
• Test heat and color in the complete assembly.

Compare our LED neon systems, read the IP selection guide, or request a custom internal strip and sealing package.

FAQ

Is the empty silicone sleeve IP68?

No. Protection applies only to a completed, correctly sealed assembly tested for the claimed condition.

Can any 6mm strip fit?

No. Component height, connector size, bending direction and thermal behavior must also be compatible.

See more flexible LED neon options and our outdoor lighting applications.